UNIGRIP Ceramic Pulley Lagging​

UNIGRIP Ceramic Pulley Lagging Material is a specially-designed lagging with ceramic tiles for wet and muddy conditions where belt slippage occurs. It comes equipped with a bonding layer, which provides extremely high adhesion when used in combination with the REMA TIP TOP adhesive systems.

UNIGRIP CR-L

With good performance in wet, muddy or dry conditions, UNIGRIP CR-L provides an effective solution to solve your conveyor drive problems and enhance production efficiency of the entire system.

Typical Field of Use

  • Pulleys operating under extreme conditions
  • Especially suitable for wet and muddy conditions where belt slippage occurs, also for belts running under very high tension


Advantages

  • Eliminates belt slippage
  • Vulcanized Al2O3 ceramic tiles
  • UNIGRIP CR-L 215: 22% ceramic tiles coverage
  • UNIGRIP CR-L 385: 45% ceramic tiles coverage
  • Unique design of ceramic tiles with the raised “knob” that increases friction between conveyor belts and pulleys
  • Improves the system stability
  • Increased belt and pulley service life
  • Belt tension can be reduced, which means lower energy consumption, lower wear of entire system and lower cost per ton

UNIGRIP CR-L 215
Standard Ceramic Pulley Lagging Material

UNIGRIP CR-L 385
Standard Ceramic Pulley Lagging Material

TECHNICAL PROPERTIES

COMPOUND

Color Black
Polymer IR/BR DIN ISO 1629
Hardness 62 Shore A DIN ISO 7619-1
Abrasion 150 mm³ DIN ISO 4649
Density 1.12 g/cm³ (69.92 lb/ft³) DIN EN ISO 1183-1
Tensile Strength 20 N/mm² (2900 psi) DIN 53 504
Elongation at break 400% DIN 53 504
Resilience 35% DIN 53 512

CERAMIC

Content of aluminium oxide 92%
Ceramic hardness 87 HRA
Open porosity 0% DIN EN 60 672 0
E-Module 300 GPa DIN EN 60 672 0
Density 3.65 g/cm³ DIN EN 60 672 0