REMASLIDE Sheets
REMASLIDE sheets enhance material flow for fine and powdery bulk materials, preventing caking and wear in silos, bunkers, chutes, and hoppers.
REMASLIDE Plates
REMASLIDE sheets are made using the highest quality polyethylene (PE) and rubber. With their exceptionally smooth surface, REMASLIDE sheets are particularly effective at improving the material flow of fine and dusty (non-sharp-edged) materials, resulting in increased throughput and productivity of your system.
Properties
- Excellent anti-adhesion properties
- Optimum protection against wear and caking
- CN bonding layer provides fast and good adhesion
Area of application
- Prevents flow problems with fine and powdery (non-sharp-edged) materials for example in coal or ore processing plants or paper, cement or gypsum industry
- Lining for bunkers, silos and other containers as well as their transport through chutes and hoppers
REMASLIDE plate
- Surface: Green, PE-UHMW, 5 mm or 10 mm
- Base: Rubber (black) with CN bonding layer, 3 mm
Technical Data:
Polyethylene Surface
| Color | Green | |
| Slide friction [µ] | 0.12 | Pin on disk - Method |
| Wear behavior (SSV) | 100 | DIN 15527 |
| Taber Abraser [mg] | 10 | ASTM D-4060 |
| Notched impact strength | 180 | ISO 179 |
Technical Data:
Rubber Layer
| Color | Black | |
| Polymer | SBR/NR | DIN ISO 1629 |
| Hardness | 40 Shore A | DIN ISO 7619-1 |
| Density | 1.27 g/cm³ (79.28 lb/ft³) | DIN EN ISO 1183-1 |
| Tensile Strength | 5 MPa (725 psi) | DIN 53 504 |
| Elongation at break | 440% | DIN 53 504 |
| Resilience | 40% | DIN 53 512 |